Pomogite s WlAN adapter ne rabotaet DWL -G122 grugusj s live CD, w Internet wijti ne mogu.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Channel:0 Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:060: USB 00.0: 0282 WLAN controller
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial
Unique ID: cLrx.Pj1JuB68U+F
Parent ID: k4bc.HJH4vdOnhl8
SysFS ID: /devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2:1.0
SysFS BusID: 1-2:1.0
Hardware Class: network
Model: "D-Link 802.11 bg WLAN"
Hotplug: USB
Vendor: usb 0x07d1 "D-Link System"
Device: usb 0x3c03 "802.11 bg WLAN"
Revision: "0.01"
Driver: "rt73usb"
Driver Modules: "rt73usb"
Device File: wlan0
Features: WLAN
Speed: 480 Mbps
HW Address: 00:21:91:82:cc:ee
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v07D1p3C03d0001dc00dsc00dp00icFFiscFFipFF"
Driver Info #0:
Driver Status: rt73usb is active
Driver Activation Cmd: "modprobe rt73usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #65 (Hub)
Kak nastroitj 4tob rabotalo?

А оно, похоже, только через ндисwраппер работает. Если есть ндисвраппер на лив-цд, то можно сеть настроить, а если нет, то надо уже "свой" лив-цд делать.